Home > Plastic Injection Molding

  • hot runner
hot runner

hot runner

  • Models No:VA002
  • cavity:1x2
  • Gate:hot runner
  • material:PC
  • Product description: A hot runner system is an assembly of heated components used in plastic injection molds that inject molten plastic into the cavities of the mold. (The cavities are the part of the mold shaped like
  • INQUIRY

Part No:Outer casing

Mold construction:Two plate

Cavity No:1x2

Ejection:Ejector pin

shrinkage:5/1000

Texturing/Polishing:Y1282B

Cavity/core:718H

Lead time:40 days

Shorter cycle time: No runner controlling the cooling time.

Easier to start: Without runners to remove, and auto cycle occurs faster and more frequently.

Less sink marks and under-filled parts: Unlike when plastic flows through a cold runner and loses heat to mold plates.

Design flexibility: Can locate the gate at many points on the part.

Balanced melt flow : Separate melt channels are in externally heated manifolds that are insulated from mold plates surrounding them.


PREVIOUS:Complex Crafts NEXT:loose core